SuppliersPublished

Importing blanks and sourcing overseas

Lower unit cost, longer lead times and a set of risks domestic buying does not carry. When it makes sense and what to check first.

  • 12 min read
  • 1,068 words
Importing blanks and sourcing overseas — warehouse at a print shop
Suppliers12 min readA1printsoft EditorialPhoto: Russ Murray / Unsplash
On this page7 sections

The short answer

  • Only worth it at real volume on a style you sell continuously
  • Landed cost includes freight, duty, clearance and the money tied up in transit
  • Lead times run to months, and you carry the stock risk
  • Approve a pre-production sample, and check consistency between production runs
  • Start with one style and one supplier, not a container of variety

Importing blanks directly is attractive because the unit price looks dramatically better than a domestic distributor's. For most decorators it is the wrong move, and for a few it is transformative — the difference is volume and predictability.

When it makes sense

All of these should be true

  • You sell one style continuously, in predictable quantities
  • The volume justifies a full shipment rather than a part load
  • You have space to store it and cash to fund it
  • The design or programme is stable for at least a year
  • You can absorb a delayed shipment without failing a customer

The stability requirement is the one that rules most shops out. Importing commits you to a style for months; if a customer changes their programme or a colourway falls out of favour, you own the stock and the decision.

The strongest case is a shop with a large recurring contract — a uniform programme, a retail line, a single garment sold in thousands. If your work is varied, a domestic distributor's next-day stock is worth more than a lower unit price.

Importing trades cash and flexibility for unit price. Only one of those is easy to get back.

The real cost

The quoted price per garment is the start of the calculation, not the end.

Add to the unit price
International freight, sea or air
Duty and any applicable tariffs
Customs clearance and broker fees
Insurance in transit
Inland delivery from the port
Storage, for months of stock
The cash tied up while it ships and sits
Sampling and pre-production approval

The cash line is the one shops underweight. Paying for a shipment months before selling it is a large working-capital commitment, and it competes with the cash gap you are already funding on ordinary orders.

Work out a landed cost per garment and compare it against your domestic price for the same quantity. If the saving is under a fifth, the flexibility you give up is probably worth more than the difference.

Lead time and risk

Domestic distribution is measured in days. Importing is measured in months, and the schedule is not fully in your control.

StageTypically
Sampling and approvalWeeks
ProductionWeeks to months
Sea freightWeeks
Customs clearanceDays, sometimes longer
Inland deliveryDays

Plan on that being longer than quoted. Port congestion, holidays in the manufacturing country and clearance delays are all normal, and a programme with no domestic fallback is a programme exposed to all of them.

Keep a domestic second source for anything you import. That is the same principle as qualifying a second supplier, and it matters more here because the primary source cannot respond quickly to anything.

Quality and consistency

Two separate things, and the second is the one that catches people.

Quality is settled by approving a pre-production sample before the run — the actual garment, in the actual fabric, at the actual weight. Never approve on a photograph or a specification sheet.

Consistency is whether the second production run matches the first. Fabric weight, shade and fit can all vary between runs, and a customer on a recurring programme will notice when this year's garments do not match last year's.

Protecting against drift

  • Keep an approved reference garment from the first run, sealed
  • Check each new shipment against it before selling
  • Specify fabric weight and shade tolerance in writing
  • Ask for a sample from the new run before it ships
  • Note the run or lot on stock as you receive it

The reference garment is the whole defence. Without it, drift is a matter of opinion; with it, it is a comparison anybody can make.

Compliance

Importing makes you the importer, with the obligations that carry. Requirements vary by country and by product, and the time to establish them is before ordering.

Establish before you commit

  • Labelling requirements — fibre content, care, country of origin
  • Product safety rules, particularly for children's garments
  • Any restricted substances legislation that applies
  • Correct duty classification for the goods
  • What documentation customs will require
  • Whether your insurance covers goods in transit

Children's garments carry the strictest requirements almost everywhere, and getting them wrong is not a paperwork problem. If a programme includes youth sizes, take advice specific to your jurisdiction rather than assuming the supplier has handled it.

You will also be asked about sourcing by corporate customers. Importing directly means you can answer precisely — factory, country, certifications — which is an advantage when buyers ask, provided you actually have the documentation.

Starting carefully

One style, one supplier, a small first order, and a domestic fallback throughout.

A first import

  • Pick your single highest-volume, most stable style
  • Order enough to test the process, not a year's stock
  • Use a customs broker rather than learning clearance yourself
  • Approve a pre-production sample and keep the reference
  • Keep buying domestically in parallel until it has landed and been checked
  • Cost it properly afterwards, including the cash tied up

Then decide with real numbers. A first shipment tells you the true landed cost, the true lead time and whether the quality holds — and that is a far better basis than a quoted unit price. The rest of the suppliers archive assumes you costed the box rather than the garment.

Paying for it

Payment terms overseas differ from domestic accounts and usually favour the supplier. New relationships commonly start with a deposit against the order and the balance before shipping, which means paying in full before you have seen anything.

That is a genuine exposure and it is worth structuring carefully — a deposit against production and the balance against a shipping document is common, and it at least ties the second payment to something having happened.

Factor currency into the landed cost. A price quoted in another currency moves between order and payment, and on a large shipment that movement can be larger than the margin you were buying. Where the amounts are significant, ask your bank about fixing the rate rather than accepting whatever it is on the day.

Filed underSuppliers
Share
Written byA1printsoft Editorial
175 articles

The print production desk at A1Printsoft. Writes the practical side of running a decorating shop: what things cost, how long they take and what to charge, checked against published trade figures.

Keep reading

More on suppliers

All Suppliers articles

Set up in an afternoon. From what you already do.

Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.