This Data Processing Agreement ("DPA") forms part of the A1Printsoft Terms of Service between A1printsoft Private Limited ("A1Printsoft", the "Processor") and the Customer (the "Controller"). It applies whenever A1Printsoft processes personal data on the Customer's behalf in providing the Service. Terms not defined here have the meaning given in the Terms of Service or in the Data Protection Laws.
1. Definitions
- Data Protection Laws — all laws on the processing of personal data that apply to the processing under this DPA, including the EU General Data Protection Regulation 2016/679 ("GDPR"); the UK GDPR and Data Protection Act 2018; the Swiss Federal Act on Data Protection; Canada's PIPEDA and Québec's Law 25; the Australian Privacy Act 1988; South Africa's POPIA; India's Digital Personal Data Protection Act 2023; the Philippine Data Privacy Act 2012; and US state privacy laws including the CCPA as amended by the CPRA — each as amended or replaced.
- Customer Personal Data — personal data in Customer Data that A1Printsoft processes on the Customer's behalf.
- Subprocessor — any third party A1Printsoft engages to process Customer Personal Data.
- Security Incident — a breach of security leading to the accidental or unlawful destruction, loss, alteration, unauthorised disclosure of, or access to, Customer Personal Data.
- "controller", "processor", "data subject", "personal data", "processing" and "supervisory authority" have the meanings in the GDPR (and the equivalent terms in other Data Protection Laws: for example "business" and "service provider" under the CCPA).
2. Roles
2.1 For Customer Personal Data, the Customer is the controller (or a processor acting for its own client) and A1Printsoft is the processor (or subprocessor).
2.2 For personal data about the Customer's staff that A1Printsoft uses to run its own business — account, billing, support and service communications — A1Printsoft is an independent controller, and its Privacy Policy applies. That data is outside this DPA.
2.3 The details of the processing are in Annex 1.
3. A1Printsoft's obligations
A1Printsoft will:
3.1 Follow instructions. Process Customer Personal Data only on the Customer's documented instructions, which are: the Terms, this DPA, the Customer's use and configuration of the Service, and any further written instructions agreed between the parties — unless the law requires otherwise, in which case A1Printsoft will tell the Customer first unless the law forbids it. A1Printsoft will tell the Customer if it believes an instruction breaks Data Protection Laws.
3.2 Confidentiality. Ensure everyone it authorises to process Customer Personal Data is bound by confidentiality, and that access is limited to those who need it to provide, support or secure the Service.
3.3 Security. Implement the technical and organisational measures in Annex 2, and keep them appropriate to the risk. A1Printsoft may update them provided the overall level of security does not decrease.
3.4 Subprocessors. Comply with clause 5.
3.5 Data subjects. Taking into account the nature of the processing, help the Customer respond to requests from data subjects to exercise their rights. The Service provides tools for this — searching, exporting, correcting and anonymising a buyer's records. If A1Printsoft receives a request directly, it will pass it to the Customer without undue delay and will not answer it itself except to confirm it has been passed on.
3.6 Assistance. Provide reasonable help with the Customer's data protection impact assessments, prior consultations and security obligations, using information available to it.
3.7 Security Incidents. Notify the Customer without undue delay, and in any case within 48 hours, after becoming aware of a Security Incident affecting Customer Personal Data, with the information the Customer reasonably needs to meet its own obligations (what happened, the data and people likely affected, the likely consequences, and the measures taken or proposed), supplementing it as more becomes known. Notification is not an admission of fault.
3.8 Deletion and return. At the end of the Service, let the Customer export Customer Personal Data and then delete it, as clause 7 describes.
3.9 Records and audits. Make available information reasonably needed to demonstrate compliance with this DPA, as clause 8 describes.
3.10 US state laws. Not sell or share Customer Personal Data (as those terms are defined under the CCPA), not retain, use or disclose it outside the direct business relationship with the Customer or for any purpose other than providing the Service, and not combine it with personal data from other sources except as the CCPA allows for a service provider.
3.11 No AI training. Not use Customer Personal Data to train, fine-tune or improve any artificial-intelligence model, and require the same of any Subprocessor that provides AI services.
4. The Customer's obligations
The Customer will:
4.1 have a lawful basis for the processing and give data subjects the notices the law requires, including a privacy notice on its storefronts (a template is provided);
4.2 obtain and record any consent needed, in particular for marketing messages, and use the Service's consent and opt-out tools;
4.3 not instruct processing that breaks Data Protection Laws;
4.4 not put special-category or payment-card data into free-text fields; the Service is not designed to hold them, and payments are taken through the processor's hosted fields.
5. Subprocessors
5.1 The Customer gives general authorisation for A1Printsoft to engage Subprocessors. The current list, with what each does and where, is published at a1printsoft.com/dpa#subprocessors and forms Annex 3.
5.2 A1Printsoft will give at least 30 days' notice of a new or replacement Subprocessor, by updating the list and emailing the Workspace owner of Customers who have subscribed to updates. The Customer may object on reasonable data-protection grounds within that period. The parties will discuss in good faith; if they cannot resolve the objection, the Customer may end the affected Service without penalty and receive a refund of prepaid fees for the period after it ends.
5.3 A1Printsoft will impose on each Subprocessor data-protection terms that protect Customer Personal Data at least as well as this DPA, and remains responsible to the Customer for each Subprocessor's performance of them.
5.4 Services the Customer chooses to connect itself — its own payment processor, accounting software, connected store, carriers, fulfilment partners, supplier feeds — are not A1Printsoft's Subprocessors. Data sent to them is sent on the Customer's instruction, under the Customer's own agreement with them.
6. Location and international transfers
6.1 Data regions. Each Workspace is placed in a data region when it is created, based on the Customer's country: European Union (Frankfurt), United Kingdom (London), United States (North Virginia), Canada (Montréal), Australia (Sydney), South Africa (Cape Town), India (Mumbai), or South-East Asia (Singapore). Customer Personal Data in the Workspace is stored in that region. Until a region has its own infrastructure, Workspaces are hosted in the European Union; the Customer is told its hosting location in Settings.
6.2 What may leave the region. Some processing necessarily happens elsewhere: the content delivery network and security edge that serves storefronts worldwide; email and SMS delivery; the control plane that holds account, billing and support records (hosted with everything else in the European Union at launch; its primary moves to the United Kingdom when that region is built); and the Subprocessors listed with their locations.
6.3 Transfer mechanisms. Where Customer Personal Data subject to the GDPR, the UK GDPR or the Swiss FADP is transferred to a country without an adequacy decision, the parties agree that:
(a) the EU Standard Contractual Clauses (adopted by the European Commission on 4 June 2021, reference 2021/914), Module Two (controller to processor) or Module Three (processor to processor), are incorporated by reference, with Clause 7 (docking) included, Clause 9 option 2 (general authorisation, 30 days), Clause 11 optional language omitted, Clause 17 option 1 governed by Irish law, and Clause 18 courts of Ireland; the Annexes to the Clauses are completed by Annexes 1–3 of this DPA;
(b) for UK transfers, the UK International Data Transfer Addendum (version B1.0) is incorporated, with the tables completed from this DPA; and
(c) for Swiss transfers, the Clauses apply with references to the GDPR read as references to the FADP and the competent authority being the Swiss FDPIC. A1Printsoft will rely instead on any adequacy decision or framework (such as the EU-US Data Privacy Framework) where available and applicable.
6.4 Transfers under other Data Protection Laws follow the mechanism those laws require; the Customer's Workspace region is chosen so that, in most cases, none is needed.
7. Return and deletion
7.1 The Customer may export its data at any time (Settings › Your data), in structured formats (JSON and CSV, with artwork files).
7.2 When the Customer closes its Workspace, it becomes read-only for 90 days, during which the Customer can export it or have it restored. On day 90, A1Printsoft erases Customer Personal Data from the Service's databases, search indexes, caches, file storage and the Subprocessors it reached, following its deletion runbook, and issues a certificate of erasure.
7.3 Records that the law requires the Customer to keep (orders, invoices, payments and similar tax records) are, at the Customer's instruction given by this DPA, sealed and retained for the legal period — normally seven years — where no user of the Service can read them, and then deleted. Backups containing Customer Personal Data are overwritten on their normal cycle (point-in-time backups within 35 days; monthly snapshots within 12 months) and are not restored except for disaster recovery.
8. Audits
8.1 A1Printsoft will answer the Customer's reasonable written security questionnaires, no more than once a year unless a Security Incident or a supervisory authority requires it, and will provide summaries of any independent assessments it obtains.
8.2 If that information is not enough to demonstrate compliance, the Customer (or an independent auditor bound by confidentiality) may audit A1Printsoft's compliance with this DPA, on at least 30 days' notice, during business hours, at the Customer's cost, no more than once a year, in a way that does not compromise the security or confidentiality of other customers' data.
9. Liability and precedence
9.1 Each party's liability under this DPA is subject to the limits in the Terms of Service.
9.2 If this DPA conflicts with the Terms, this DPA prevails for the processing of Customer Personal Data. If the Standard Contractual Clauses conflict with this DPA, the Clauses prevail.
Annex 1 — Details of the processing
Parties. Data exporter: the Customer (controller), contact: its Workspace owner. Data importer: A1Printsoft (processor), contact: the Privacy Lead, privacy@a1printsoft.com.
Subject matter and duration. The provision of the Service under the Terms, for as long as the Customer uses it and until deletion under clause 7.
Nature and purpose. Hosting, storing, organising, displaying, transmitting and otherwise processing Customer Data so the Customer can quote, sell, design, produce, deliver and invoice printed goods; run storefronts, portals and team stores; communicate with its buyers; and use AI-assisted drafting and design features.
Categories of data subjects.
- The Customer's buyers and prospective buyers (individuals, and contacts at business customers, schools, clubs and organisations).
- Recipients of the Customer's orders (for delivery).
- Team-store participants and organisers (for example names and numbers on garments).
- The Customer's suppliers' and partners' contacts.
- The Customer's own staff, in the records they create (as the author of a quote, the person who scanned a job).
Categories of personal data.
- Identity and contact: names, email addresses, phone numbers, postal and delivery addresses, company and job title.
- Commercial: quotes, orders, invoices, payments status (never full card numbers), credit terms, order history, reorder patterns.
- Content: artwork, logos, photographs, text and names to be printed, designs and their revisions, proofs and approvals (including the name typed to sign an approval and the device used).
- Communications: messages and emails exchanged through the Service, marketing consent and opt-out records.
- Technical: IP address, browser and device information, and cookies needed for baskets, sessions and security on storefronts.
Special categories. None are intended. The Customer must not upload special-category data, except as incidental content of artwork the buyer chooses to print, for which the buyer is responsible.
Frequency. Continuous.
Retention. As in the Data Retention Schedule and clause 7, and as the Customer configures (for example how long print files are kept after despatch).
Subprocessors. As published under clause 5.
Annex 2 — Technical and organisational measures
Isolation of each customer's data
- Every table holding customer data carries the customer's identifier and enforces row-level security in the database; no application role can bypass it, and an automated test fails the build if any table lacks the policy.
- API keys, background jobs and file access are bound to one Workspace and signed.
Access control
- Passwords hashed with Argon2id; a minimum of 12 characters; common passwords refused; repeated failures slow sign-in without locking accounts out.
- Two-factor authentication (TOTP) available to every user, required for Network-tier owners and for all A1Printsoft staff.
- Short-lived sessions (15-minute access tokens, 30-day refresh tokens rotated on every use); signing out everywhere, a password reset or deactivation takes effect within one request.
- Role-based permissions per user and per API key.
A1Printsoft staff access
- Staff reach a customer's Workspace only through impersonation that records a reason naming the support ticket, is read-only by default and time-boxed (15–60 minutes), shows a banner to the customer's users and emails the owner. Acting as the owner needs a second staff approver and lasts at most an hour. Impersonation can never change billing, delete data or export it.
- Every staff action is recorded in the platform audit log.
Encryption
- All traffic encrypted in transit with TLS 1.2 or higher.
- Stored secrets (two-factor secrets, integration tokens, SFTP and webhook secrets) sealed with AES-256-GCM under keys held apart from the database.
- Server disks encrypted at rest (full-disk encryption); file storage and backups encrypted at rest.
- Payment cards are captured by the payment processor's hosted fields and never reach A1Printsoft's systems.
Integrity and audit
- An append-only audit log of changes and access, hash-chained daily and written to storage with a compliance-mode object lock for seven years, so it cannot be altered or deleted.
Uploads and untrusted content
- Uploaded files limited in size, scanned for malware, and parsed in sandboxed processes; download links are signed and expire within 15 minutes.
- Rate limits and bot challenges on sign-up, uploads and AI features.
Availability and resilience
- Continuous database backup with 35-day point-in-time recovery and monthly snapshots for 12 months; restores are tested.
- Monitoring of availability and errors, with an on-call engineer paged for critical incidents.
- Error reports are scrubbed of personal data when received.
Development and operations
- Changes pass automated tests, type checks and a licence scan before release.
- Infrastructure access limited to named engineers, with individual accounts and two-factor authentication.
AI features
- Only the data a task needs is sent to a model provider; providers are bound by data-processing terms and may not train on it.
- A drafted AI output never publishes or sends by itself; a person approves it.
Annex 3 — Subprocessors
See the published Subprocessors list, which forms part of this Annex.
A1Printsoft — Subprocessors
These are the third parties that may process personal data in Customer Data on A1Printsoft's behalf. We give at least 30 days' notice before adding or replacing one (Data Processing Agreement, clause 5). To be told of changes, email privacy@a1printsoft.com.
Services that a shop connects itself — its own payment processor account, accounting software, connected store, carriers, fulfilment partners and supplier feeds — are not our subprocessors: data goes to them on the shop's instruction under the shop's own agreement.
Core infrastructure (every Workspace)
| Subprocessor | What it does | Data | Location |
|---|---|---|---|
| Hetzner Online GmbH | Servers running the application, database, cache and queues | All Customer Data | Germany / Finland (EU) |
| Cloudflare, Inc. | Content delivery, DNS, TLS, web application firewall, bot challenge; object storage (R2) for artwork, proofs and print files | Storefront traffic (IP addresses, requests); stored files | Global edge network; R2 storage with EU jurisdiction lock |
| Email delivery: Postmark (ActiveCampaign, LLC) or Amazon Simple Email Service (Amazon Web Services EMEA SARL) — the platform sends through one of the two, and the one in use is marked here before it carries Customer Data | Sending email: quotes, proofs, order updates, account emails, shop marketing | Recipient address and name, message content | United States (Postmark); EU, Ireland or Frankfurt (Amazon SES) |
When a data region gains its own infrastructure, the hosting subprocessor for Workspaces in that region becomes Amazon Web Services, Inc. in the region's AWS location (Frankfurt, London, North Virginia, Montréal, Sydney, Cape Town, Mumbai or Singapore). This list will be updated, with notice, before any Workspace moves.
Features used only when enabled
| Subprocessor | What it does | Data | Location |
|---|---|---|---|
| Stripe Payments Europe Ltd / Stripe, Inc. | Managed payments ("A1Pay") for shops in the EU, UK, US, Canada and Australia; billing for A1Printsoft's own invoices | Buyer name, email, billing address, amount (cards entered in Stripe's hosted fields) | EU / US |
| Razorpay Software Pvt Ltd | Managed payments for shops in India | As above | India |
| Twilio Inc. | SMS delivery | Phone number, message content | US / EU |
| Meta Platforms Ireland Ltd (WhatsApp Business Platform) | WhatsApp messages | Phone number, message content | EU / US |
| MSG91 (Walkover Web Solutions Pvt Ltd) | SMS delivery in India | Phone number, message content | India |
| Semaphore (Kickstart Ventures Inc.) | SMS delivery in the Philippines | Phone number, message content | Philippines |
| Clickatell (Pty) Ltd | SMS delivery in South Africa | Phone number, message content | South Africa |
Not yet in use
AI model provider. The AI design drafts and AI-drafted text (quotes, content, campaigns) run without an outside model provider today. Before one processes Customer Data, it is added to this list with the 30 days' notice above, with the data it receives (the prompt and only the fields a task needs, never used for training) and where.
Not subprocessors
We run our own monitoring, logging and error reporting (Prometheus, Loki, Grafana, Sentry, self-hosted on the infrastructure above). Error reports are scrubbed of personal data when received. We use no third-party analytics inside the product.