Approved in the studio. Straight into the printer.
The moment a buyer approves, A1 makes the file each machine wants, checks it and sends it on: films per ink, mirrored transfers, a file per player, cut lines for the cutter.
22 playersApproved
- Mirrored for film✓
- 300 dpi at print size✓
- Name and number set✓
Nine machines. Each gets the file it wants.
Every print method has its own output profile, so each machine on your floor receives a file made for it: the right format, resolution and colour, mirrored when it should be.
Press 1 · 6-colour carousel
One 1-bit film per ink, white underbase first, registration marks on every film.
DTF printer · 60 cm roll
A mirrored full-colour file per transfer, at 300 dpi.
DTG printer · one platen
The full-colour design placed on the garment’s print area.
Embroidery · 4 heads
The stitch placement, with the digitiser’s file attached: DST, PES, EXP and more.
Sublimation · printer + press
Mirrored, one file per piece, named for the player and size.
Cutter · 60 cm
The print and its CutContour line, at 1:1, for kiss-cut or die-cut.
Laser · 60 × 40 cm bed
One plate per recipient, 500 dpi, inverted if the material needs it.
Wide format · 1.6 m
Banners and signs at the size the buyer typed.
Digital press · SRA3
Each face of cards and flyers, with 3 mm bleed drawn in the studio.
Machine names are your own. Add a profile per machine: format, resolution, colour, mirror, and where its files go.
One film per ink, ready for the exposure unit.
The design is split into the shop’s own inks, one 1-bit film each, in the order they print. The white underbase comes first, choked so it never peeks out. Every film carries the same registration marks.
A file for every player. Mirrored, named, ready.
Names and numbers come from the roster, so every shirt is its own file: mirrored for sublimation, labelled with the player and size, and listed in a CSV the packer can tick off.
1,MOYO,10,L,SO-2402_1_01_MOYO_10.png
2,SMITH,9,M,SO-2402_1_02_SMITH_9.png
3,OKAFOR,4,L,SO-2402_1_03_OKAFOR_4.png
4,NOWAK,11,S,SO-2402_1_04_NOWAK_11.png
5,REYES,7,M,SO-2402_1_05_REYES_7.png
6,CHEN,23,XL,SO-2402_1_06_CHEN_23.png
… 16 more
The print, and the line your cutter follows.
Stickers and print & cut come as two files that line up at 1:1: the print, and a CutContour line around it that your cutter’s software picks up by name.
Every DTF job on the floor, packed onto one roll.
Jobs from different orders are nested onto one film, as tight as the transfers allow, so you print a metre instead of five, and the placement map names the order and line of every transfer you cut.
Printer-friendly, down to the crop marks.
Bleed, trim and safe zone are drawn in the studio, so nothing important lands in the cut. Next: the full prepress set, from CMYK through your press’s own profile to PDF/X-4 with marks and colour bars.
A bad file stops at the desk, not on the press.
Every file is checked as it’s made. A failed check sends the job to File checks with the reason, and someone decides: accept it, ask the customer, or make it again.
Files named your way, sent where your press looks.
Every file is named from a pattern you set, so the operator knows what it is before opening it. Then it goes to your hot folder, your SFTP server, or a download.
Pattern {order}_{line}_{method}_{area}.{ext} · roster files add the piece and player
A folder synced to the RIP’s own machine, and Dropbox Coming
Reorder next year. Get the same file.
Files are made from the approved design and the renderer’s version, so the same order always makes the same file. Approved designs are kept; the files themselves are tidied away after despatch and rebuilt when needed.
Same design, same file
Each file is tied to the design version and the renderer that made it. Re-render all when a profile changes.
Kept as long as it matters
Print files are removed 90 days after despatch by default; approved designs and proofs stay, so a reorder rebuilds them.
A job sheet with every file
The worksheet carries the job, its files and a barcode the floor scans.
Screen · 2 inks · Press 1
About print files
Not answered here? Write to us and a person from the shop-floor team replies within a working day.
Do I still need a designer to make files?
No. The approved design becomes the file for its method automatically. Your designer reviews what the checks flag, rather than rebuilding every file.
What formats do you produce?
Today: PNG at the method’s resolution (films per ink for screen print, mirrored files for DTF and sublimation, 1-bit for laser), plus CutContour SVG cut lines. PDF/X-4, DXF and stitch files made from the design are coming.
Can it send files straight to my RIP?
Files go to a hot folder in your storage, to an SFTP server such as your RIP’s, or download as a zip. A folder synced to the RIP’s own machine is coming.
How are jerseys handled?
One file per player with their name and number, mirrored for sublimation, labelled with the size, plus a CSV of every piece.
Is there a gang sheet builder?
Yes. DTF transfers from several orders are nested on one roll, by their shapes where your profile asks, and the placement map names each transfer’s order and line. An order’s own transfers gang onto its sheets as soon as its proof is approved.
Let the files make themselves.
Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.