ArtworkHow-tosPublished

Designing for one colour

The cheapest print to produce and the hardest to design well. How to reduce a full-colour logo to a single ink without losing it.

  • 12 min read
  • 1,110 words
Designing for one colour — artwork design at a print shop
Artwork12 min readA1printsoft EditorialPhoto: Balázs Kétyi / Unsplash
On this page7 sections

The short answer

  • One colour means one screen — the cheapest print there is
  • Colours that carry meaning must become shape, weight or texture
  • Gradients become halftones, flat blocks, or they go
  • A knockout — printing the background and leaving the shape blank — solves a lot
  • Sell it as a design decision, not a budget compromise

Single-colour prints are the backbone of screen printing. They are the cheapest to set up, the fastest to run, the most forgiving to register, and they age well on a garment. They are also the hardest to design, because everything a full-colour logo does with colour has to be done another way.

Why one colour is worth it

ColoursScreensSetupRegistration
One1LowestNone needed
Two2DoubledRequired
Four4Four timesCritical
Four on dark5 with underbaseFive times, plus flashesCritical

Because setup does not shrink with quantity, the difference is most dramatic on small orders. A one-colour print on twenty-four pieces is viable where a four-colour version of the same design is not.

It also removes registration entirely. Nothing has to line up with anything, so the print is faster, spoilage is lower, and a manual press produces results indistinguishable from an automatic.

One colour is not a limitation. It is the only version that costs the same on twelve pieces as on two hundred.

What breaks

Four things, and each has a solution.

Colour carrying meaning. Where two elements are distinguished only by colour — a red section and a blue section — they merge into one shape.

Gradients. There is no second ink to fade into, so a gradient must become a halftone, a flat block, or disappear.

Layering. A logo where one element sits over another in a different colour loses the distinction, so the shapes visually collide.

Fine multi-colour detail. Small elements relying on colour separation to be legible stop being legible.

Reduction techniques

What to reach for

  • Knockout — print the background and leave the shape unprinted
  • Outline — replace a colour boundary with a line
  • Halftone — a dot pattern to suggest a lighter tone from one ink
  • Weight — make one element bolder to separate it
  • Gap — a small space where two shapes met
  • Remove — drop the element that was only there in colour

The knockout is the most useful and the least used. Instead of printing a shape in one colour on a garment, print a filled area around it and let the garment show through — which gives you two visual tones from a single screen.

Halftones give a genuine second tone but add a constraint: they need a finer mesh to hold the dot, so a design mixing solid blocks and halftones may not sit comfortably on one screen. Test before promising it.

Removal is legitimate and usually the right call for a strapline or a registration mark. If an element cannot be read at print size, it is adding ink rather than information.

Choosing the ink

Contrast with the garment first, brand colour second. A brand colour that sits close to the garment colour produces a print nobody can read from across a room.

GarmentUsually
White or paleThe brand's darkest colour
Mid-toneWhite, or a much darker brand colour
DarkWhite, or a light brand colour with an underbase
Brand-coloured garmentWhite or black — tonal is rarely readable

Note the last row. Printing navy on a navy garment is a tonal effect that works in a photograph and disappears in daylight. If a customer wants it, show them a sample rather than describing it.

Where a specific brand colour is required, get the reference and mix to it. Spot colour is the only process that can genuinely match, which is worth saying explicitly — the details are in colour matching.

Light on dark

A light ink on a dark garment usually needs an underbase — a white layer printed first so the colour above it reads true. That makes a nominally one-colour print a two-screen job.

Two ways around it. Print in white alone, which needs no underbase and is often the strongest-looking option on a dark garment. Or use an ink formulated for opacity on darks, accepting a slightly heavier hand.

Say which you are quoting. A customer told "one colour" who receives an invoice reflecting two screens has a reasonable complaint, and the distinction should be on the quote — it is the same clarity as pricing an extra location as its own line.

Selling it

Present it as a design decision rather than a compromise, because it usually is one. Single-colour prints look deliberate, age well, and suit a great deal of club, event and workwear far better than a full-colour reproduction of a logo designed for a screen.

What to say

  • "One colour is the cleanest option at this quantity, and it costs [$X] rather than [$Y]"
  • "I'd simplify it like this — here is a mockup"
  • "It'll also last better; fewer ink layers means less to crack"
  • "You'll own the one-colour version for future orders"

Mockups are the part worth automating. Product visualisation puts the simplified design on the actual garment colour in seconds, and a customer looking at a realistic image argues far less than one reading a description of what you intend to remove.

Show the reduction rather than describing it. A customer looking at a well-made single-colour version usually prefers it, and the conversation stops being about what was lost.

Charge for the reduction. It is real design work producing an asset they keep and reuse — the same basis as an embroidery version of a logo. The rest of the artwork archive assumes the one-colour version was designed rather than flattened.

Where one colour works best

Some categories are natural fits, and recognising them turns a cost conversation into a recommendation. Workwear is the clearest: a single-colour chest logo on a polo or a hi-vis is the industry norm, reads at distance, and survives repeated industrial washing better than a stack of ink layers.

Event and club work is the second. A one-colour print lets you hold a price point that makes a hundred-piece run viable for a committee working from subscriptions, and the constraint usually produces a better-looking garment than a full-colour reproduction of a logo drawn for a website.

It also suits anything printed across many garment colours. A single ink chosen for contrast — usually white or black — works on a whole range of colourways without a separate separation for each, which keeps a team store simple to operate and simple to reorder from.

Filed underArtworkHow-tos
Share
Written byA1printsoft Editorial
175 articles

The print production desk at A1Printsoft. Writes the practical side of running a decorating shop: what things cost, how long they take and what to charge, checked against published trade figures.

Keep reading

More on artwork

All Artwork articles

Set up in an afternoon. From what you already do.

Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.