EquipmentPublished

When to buy your first press

Outsourcing until it hurts is a strategy, not a failure. The volume where a press earns its place, and what to buy first.

  • 11 min read
  • 1,016 words
When to buy your first press — equipment machine at a print shop
Equipment11 min readA1printsoft EditorialPhoto: Lennert Naessens / Unsplash
On this page6 sections

The short answer

  • Outsource until the numbers say otherwise — it is a legitimate strategy, not a stopgap
  • The signal is steady repeat volume plus margin you are handing away
  • A press is the cheap part; the dryer and screen room are most of the cost
  • Buy for the work you have, not the work you hope for
  • Budget three to six months before output is genuinely reliable

Buying the first press is the point where a decorating business becomes a manufacturer, and it is usually made emotionally. The equipment is the visible symbol of being a real print shop, and that pulls the decision earlier than the arithmetic supports.

The arithmetic is not complicated, and it usually says wait a little longer than instinct does.

Outsource first, deliberately

Selling decorated apparel without owning a press is a legitimate business. You handle the customer, the artwork, the specification and the delivery, and a contract decorator produces it.

What that buys you is information. Six months of outsourcing tells you what your real order pattern is — quantities, colour counts, garment types, how often work repeats — and that is exactly what determines which machine you should buy.

Shops that buy first frequently buy the wrong thing, because they were guessing at their own order book. Buying second means buying for demonstrated demand.

Six months of outsourcing tells you which machine to buy. Buying first is a guess.

The volume signal

Two conditions together, not either alone.

Steady, repeating volume. Not one large order — a consistent flow across months. A press bought on the strength of a single contract is a press with an uncertain second year.

Margin you are handing away. Add up what you paid contract decorators over six months. If it is a meaningful fraction of a machine, and the work is the same job type repeatedly, the case is real.

Before you commit

  • Six months of outsourced spend, totalled
  • Average order quantity, and how much is repeat
  • Typical colour count — one or two, or four plus?
  • How much would stay outsourced anyway
  • Whether you have someone to run it
  • Whether your space and services can take it

The fourth line prevents the commonest miscalculation. A shop that buys a manual press will still outsource its large automatic-scale runs, so the machine only recovers part of the outsourced spend — and the payback calculation has to use that part, not the total.

What to buy first

Buy for the work you have. The three realistic entry points suit genuinely different order books.

If your work isStart with
Small runs, many colours, mixed fabricsDTF — printer or bought-in transfers, plus a press
Cotton, retail quality, soft handDTG
Larger runs, one to four coloursManual screen press
Names, numbers, one-offsVinyl cutter and press
Caps, polos, corporateSingle-head embroidery

Note that only one row is a screen press. Many shops discover their actual order book is short runs with high colour counts, which is digital territory — and a screen press bought for that work sits idle while transfers are still being bought in.

The cheapest genuine entry is a cutter and a heat press, and it remains useful long after you have outgrown it. If you are unsure, that combination costs little and teaches you a great deal about how garments behave.

The press is the cheap part

The single most common budgeting error. A manual screen press is inexpensive; the things it needs to function are not.

You also needWhy
DryerNon-negotiable — a flash unit will not cure a run
Screens, frames, squeegeesSeveral per job; consumable
Exposure unitOr you outsource screen making
Washout booth and drainageIncluding a filtration trap
Emulsion, chemistry, inkOngoing
Film outputPrinter and film

The dryer is the item that decides whether the setup works. A press with no proper dryer produces prints that look fine and fail in the wash, and a flash unit is not a substitute for a run. Budget for it as seriously as the press.

The screen room can be deferred by buying pre-burned screens from a supplier initially. That is a reasonable staging decision — it removes the exposure unit, washout and chemistry from the first purchase and lets you learn printing before learning screen making.

Space and services

Check the building before you order the machine. A press, a dryer and a washout area need more space than people expect, and the services are where deliveries stall.

A dryer typically needs a dedicated high-current circuit and extraction. Washout needs water, drainage and a trap. The whole line needs to be laid out so a job moves in one direction rather than crossing the room repeatedly.

Get an electrician to confirm the supply before ordering rather than after delivery. That is the single most common cause of a new machine sitting uncrated for a fortnight, and it is entirely avoidable.

Learning to use it

Budget three to six months before output is reliable, and plan the transition so customers do not fund your learning curve.

A sensible transition

  • Keep the contract decorator through the first three months
  • Run your own internal or sample work first — nothing with a deadline
  • Wash test everything you produce, on every new garment
  • Move simple repeat jobs in-house before anything complex
  • Expect higher spoilage; budget garments for it
  • Take a proper course or a day with an experienced printer

Keeping the contractor is the part shops skip to save money, and it is the cheapest insurance in the transition. When a job goes wrong in month two — and one will — having somewhere to send it means a customer never finds out.

Then run the arithmetic again after six months against real numbers rather than projections. If the machine is earning, the case for the next one writes itself; if it is not, you have learned something before buying a second. That is the same cost-per-print discipline applied after the fact. The rest of the equipment archive assumes you bought for the work you had.

Filed underEquipment
Share
Written byA1printsoft Editorial
175 articles

The print production desk at A1Printsoft. Writes the practical side of running a decorating shop: what things cost, how long they take and what to charge, checked against published trade figures.

Keep reading

More on equipment

All Equipment articles

Set up in an afternoon. From what you already do.

Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.