EquipmentPublished

Label printers and tagging orders

The cheapest equipment in the shop and one of the most useful. Labelling jobs, bags, boxes and shelves so nothing gets lost.

  • 12 min read
  • 1,035 words
Label printers and tagging orders — equipment machine at a print shop
Equipment12 min readA1printsoft EditorialPhoto: Bank Phrom / Unsplash
On this page7 sections

The short answer

  • Most lost time in a shop is finding things, and labels fix that
  • Label jobs, work in progress, bags, boxes and shelves
  • Thermal printers are cheap, fast and need no ink
  • Barcodes are worth it once you are tracking job stages
  • Put the printer where the work happens, not in the office

A label printer costs less than almost anything else in a decorating shop and removes a category of daily friction: garments nobody can identify, boxes nobody can match to an order, and shelves where work in progress accumulates anonymously.

What labelling solves

The daily problems

  • "Whose are these?" about a stack of garments
  • Partly decorated work sitting unidentified
  • Boxes that must be opened to know what is inside
  • Bagged store orders with handwritten names
  • Blanks received and stored without a job reference
  • Two similar jobs mixed together

Partly decorated work is the worst of these. It is not raw stock and not finished goods, and on a multi-stage job it can sit for days looking like either — the tracking problem in multi-method orders.

Nothing in the shop should require somebody to remember what it is.

What to label

ItemLabel with
Incoming blanksJob number, customer, date received
Work in progressJob, stage completed, stage next
Finished garmentsJob and quantity
Individual store bagsName, size, order reference
BoxesCustomer, contents, box n of m
Shelves and baysLocation identifier
ScreensFrame number, mesh, job

Shelf and bay labels are the ones shops forget. Labelling the storage as well as the goods lets a job be assigned to a location, which turns "find the blue hoodies" into "bay C4".

Printer types

TypeNotes
Direct thermalNo ink; fades over months — ideal for jobs
Thermal transferUses a ribbon; permanent
Inkjet or laser sheetsCheap to start; slow and wasteful
Handheld label makerFine for shelves, too slow for jobs

Direct thermal is right for almost everything in a decorating shop. There is no ink or ribbon to run out, printing is instant, and the fact that labels fade over months is irrelevant for something that will be thrown away in a fortnight.

Use thermal transfer only where a label must last — shelf identifiers, screen tags, anything that stays in place for years.

What goes on a label

Keep it minimal and readable

  • Job number, large enough to read at a distance
  • Customer name
  • Quantity and, where relevant, size
  • Due date
  • The next stage, on work in progress
  • A barcode, if you scan

The due date earns its place because it turns a labelled stack into a visual priority system. Anyone walking past the work-in-progress rack can see what is urgent without opening the schedule.

Resist adding everything. A label crowded with detail is slower to read than one carrying four pieces of information, and reading speed is the entire point.

Barcodes

Worth it when

  • You track jobs through multiple stages
  • Volume is high enough that typing job numbers is slow
  • You want accurate stage timings without effort
  • Store orders are picked individually
  • Stock locations are being tracked

Scanning removes the friction that makes status capture unreliable. An operator who must find a job on a screen and tap through to update it will do it at the end of the day from memory; one who scans a label does it as they finish — which is what makes shop floor capture produce data worth having.

Where jobs are managed in a production system, the barcode is simply the job reference, so labels print from the same record that holds the schedule and the status updates arrive without anyone typing anything.

Where to put the printers

At the point of use

  • Receiving bench — label blanks as they arrive
  • Press area — label work in progress
  • Finishing bench — bag labels and box labels
  • Office — administrative labels

A single printer in the office guarantees the system fails. Labelling only happens when it is easier than not labelling, and walking across the building never is.

Keep spare rolls beside each printer rather than in a store cupboard. A printer that has run out and has no stock next to it stops being used that day, and the habit takes weeks to recover.

Thermal printers are cheap enough that two or three is a sensible investment for a shop of any size. The finishing bench one is the highest priority, since that is where bag and box labels are produced in volume — the routine in finishing and packing.

Getting it adopted

What makes it stick

  • Start with one problem — usually work in progress
  • Make printing a label a single action
  • Keep label stock beside every printer
  • Agree the rule: nothing moves stage without a label
  • Label shelves so there is somewhere for things to go
  • Extend to bags and boxes once the first habit holds

Show people why rather than instructing them. An operator who has spent twenty minutes hunting for a job understands the point of a labelled rack immediately, and the habit forms because it is obviously easier rather than because it was mandated.

The rule is what turns equipment into a system. Labels available but optional get used inconsistently, which is worse than not having them because nobody can trust that an unlabelled item is unimportant.

Choose one label size and stick to it. Multiple stocks mean somebody has to change the roll, and a printer loaded with the wrong size is a printer nobody uses — a single practical size for jobs and bags covers almost everything a decorating shop needs.

Print labels from the job record rather than typing them. A label typed by hand can be wrong, and a wrong label on a bagged garment sends it to the wrong person, which is precisely the failure the labelling was supposed to prevent.

Expect this to pay back faster than almost anything else you buy. The equipment is inexpensive, the habit takes a week, and the time recovered from not searching for things is measured in hours every week rather than minutes. The rest of the equipment archive assumes everything in the shop can be identified without asking.

Filed underEquipment
Share
Written byA1printsoft Editorial
175 articles

The print production desk at A1Printsoft. Writes the practical side of running a decorating shop: what things cost, how long they take and what to charge, checked against published trade figures.

Keep reading

More on equipment

All Equipment articles

Set up in an afternoon. From what you already do.

Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.