The short answer
- DTG for cotton, softest hand, best on light garments
- DTF for blends and polyester, and for anything under a dozen pieces
- DTF is cheaper on small runs because there is no per-garment platen setup
- DTG wins on hand feel, and customers notice hand feel
- Decide by fabric first. Fabric rules out one of them more often than anything else
Most shops choose between direct-to-garment and direct-to-film based on which machine they bought first. That is understandable and it costs money, because the two processes have genuinely different strengths and the right answer changes from order to order. A shop that decides per order rather than per habit produces better-looking work at lower cost, and stops turning away jobs that one of its machines handles perfectly well.
The decision is not complicated once you break it into the four things that actually matter. What the garment is made of, how many pieces there are, what the customer expects the print to feel like, and how much of the design is dark ink on a dark garment. Everything else is detail.
What does each process actually do well?
DTG prints ink directly into the fibres of the garment. On cotton that produces a print you can barely feel, because the ink has become part of the fabric rather than sitting on top of it. The colour is soft and photographic, gradients render cleanly, and after a few washes the print looks like it belongs on the shirt. This is why DTG remains the standard for retail-quality garments and for anything a customer will run their hand over before deciding whether they like it.
DTF prints onto a film, which is then powdered, cured and heat-pressed onto the garment. Because the ink never touches the fabric directly, the fabric barely matters — polyester, nylon, blends, canvas, bags and hats all work. The print sits on the surface as a thin flexible layer, so the hand feel is more present than DTG, and the colours are noticeably more vivid on dark garments where DTF's white underbase is more opaque.
The transfers can also be made in advance and pressed later, which is a scheduling advantage people underrate. You can gang up a sheet of transfers for eight different small orders, run them in one pass, and press each order as it comes up. That is one setup instead of eight, and it is the same logic that makes setup the dominant cost on short screen print runs.
What does each cost per print?
Approximate figures for a full-front print on a dark garment, which is the demanding case for both processes:
| DTG | DTF | |
|---|---|---|
| Ink / film per print | $1.15 | $0.86 |
| Pretreat | $0.34 | — |
| Labour per piece | $0.71 | $0.52 |
| Cure / press | $0.18 | $0.22 |
| Per print | $2.38 | $1.60 |
DTF is roughly a third cheaper per print on this comparison, and the gap widens on small orders. DTF has no per-garment pretreat step and no platen changeover between sizes, so on a six-piece order with mixed sizes DTG spends real time that DTF simply does not spend.
The gap narrows on light garments, where DTG skips the white underbase entirely and its ink consumption drops sharply. A one-colour print on a white cotton tee is one of the cheapest things a DTG machine does. In that specific case it is competitive on cost while winning comfortably on feel. If you are using these numbers to justify a purchase rather than to route an order, run them through the full cost-per-print method first, because the finance payment and the downtime allowance change the answer.
Which one for which order?
| Order | Choose | Because |
|---|---|---|
| 6 cotton tees, full colour | DTF | Setup per piece is too high on DTG |
| 60 white cotton tees | DTG | No underbase needed, best hand feel |
| 24 poly performance tees | DTF | DTG will not bond to polyester |
| 12 dark 50/50 hoodies | DTF | Blend, and DTF's white is more opaque |
| 200 dark cotton tees | Screen | Neither — this is a screen job |
| 1 sample for approval | DTF | Fastest to a physical proof |
| Retail line, cotton, soft hand | DTG | Customer will touch it before buying |
| Caps, bags, non-flat items | DTF | DTG needs a flat platen |
The last row is where a lot of shops leave money behind. A DTG machine cannot print a cap or a finished bag. A DTF transfer and a heat press can, which means a shop with DTF can quote on a whole category of work that a DTG-only shop has to decline or subcontract.
Where does each one fail?
DTG fails on synthetics, and it fails in a way that is not obvious immediately. The ink needs cotton fibres to bond into, so on polyester the print may look acceptable coming off the press and then crack or lift after a few washes. That failure arrives at the customer rather than in your shop, which is the expensive kind. It is also unforgiving of poor pretreat — too little and the white looks grey and blotchy, too much and you get a visible box around the print.
DTF fails on hand feel when the design is large. A full-front, edge-to-edge print in DTF is a substantial sheet of material sitting on the garment, and on a lightweight tee it changes how the shirt drapes. Customers do not always articulate this, but they notice it. DTF is also less forgiving of a poorly set heat press: too cool and adhesion is weak, too hot and the film can gloss or the garment can scorch.
Both processes fail on quantity. Past roughly 100 to 150 pieces of a one- or two-colour design, screen printing is cheaper per piece and gives a better result, and neither digital process will catch it. Knowing where your own crossover point sits is worth an afternoon of arithmetic, and the rest of the production archive assumes you have found it.
Should you run both?
If your order mix includes both retail-quality cotton work and mixed-fabric or small-quantity work, then yes. The second machine tends to pay for itself faster than owners expect, because it converts declined quotes into accepted ones rather than merely making existing jobs slightly cheaper.
If you are choosing your first digital machine and are unsure of your mix, DTF is the more flexible starting point. It handles a wider range of substrates, it is cheaper per print, its transfers can be batched and stored, and the equipment cost is lower. DTG is the better second machine, bought once you know you have enough cotton work to justify the softer hand it produces.
Whichever you run, the artwork rules change with the process. A file that fails at 150dpi for a large screen print may be perfectly acceptable digitally at a smaller size, so set your upload thresholds against the process you will actually use rather than against a single blanket number.
Ask these four questions on every order
- What is the garment made of? Synthetic or blend rules out DTG immediately
- How many pieces? Under 12 favours DTF; over 150 favours screen
- Light or dark? Light cotton is DTG's strongest case
- Will the customer handle it before buying? If so, hand feel decides it
- Routing each order to the right process automatically is part of our production and order management



