SoftwarePublished

Storing artwork so you can find it in two years

Customer logos, separations and digitised files are an asset. How to organise them, what to name them, and why folders by job number fail.

  • 11 min read
  • 1,104 words
Storing artwork so you can find it in two years — artwork design at a print shop
Software11 min readA1printsoft EditorialPhoto: Kumpan Electric / Unsplash
On this page7 sections

The short answer

  • Store artwork against the customer, not in a folder per job
  • Keep the original, the print-ready file, the separations and the approved proof
  • Name files so the customer, design and size are readable without opening them
  • Keep versions rather than overwriting — "final_v2_new" is not a version system
  • Test your backup by restoring something, not by trusting that it runs

Every decorating shop accumulates artwork, and most organise it by accident. Files land in a downloads folder, get worked on, get used, and end up in a directory named after a job number that meant something at the time. Two years later a customer asks for a repeat and somebody spends forty minutes looking.

That accumulated artwork is genuinely valuable — it is the reason a reorder is cheap to produce — and it is worth ten minutes of structure.

Why do job-number folders fail?

Because nobody searches by job number. When a customer calls, they say "the design we did for the tournament last summer", and a folder called 4417 is no help at all.

Job folders also fragment the thing you actually want. A customer who has ordered six times has their logo in six places, in six states of preparation, and no way to tell which is current. The next person to touch it picks one at random.

They also fail on reorders, which is the whole point of keeping artwork. The question at reorder time is not "what was in job 4417" but "what do we have for this customer, and which is the approved one".

Store against the customer

One place per customer, holding their current artwork in every form you need. Jobs reference it rather than containing their own copy.

LevelHolds
CustomerLogos, brand colours, approved proofs, digitised files
DesignEach distinct artwork, with its versions
JobA reference to the design, plus job-specific sizes and placement

The practical test is whether somebody who has never seen the account can produce a repeat without asking a question. If they can find the customer, see one current logo, and read the size and placement from the last approved proof, the structure is working.

Holding it against the account in your order system rather than in a folder tree is what makes that reachable from the job. A file share works too, provided the naming is disciplined — the failure mode is not the technology, it is when only one person knows where things are.

Nobody has ever searched their artwork by job number.

What is worth keeping?

Per design

  • The original as supplied — vector where you have it
  • Your working file, layered
  • Print-ready output at the sizes actually used
  • Separations, with the mesh counts they were made for
  • The digitised file for embroidery, with the machine format noted
  • The approved proof, with its date
  • Colour references and any mix record

The separations and mesh counts are the ones shops discard and then regret. Redoing a separation is real work, and doing it differently from last time produces a reorder that does not match the first run — which the customer notices even when they cannot say why.

Keep the original as supplied even after you have rebuilt it. If a customer later disputes what they sent, that file settles it, and it costs nothing to retain.

Naming

Names should be readable without opening anything. A consistent pattern beats a clever one, and the only real requirement is that it sorts sensibly and says what the file is.

Instead ofUse
logo final.aieastside-fc_crest_v3.ai
print.pngeastside-fc_crest_10in-chest_print.png
sepseastside-fc_crest_4col_156mesh_seps.eps
emb.dsteastside-fc_crest_90mm_polo.dst

Include the size in the name for anything size-specific. An embroidery file digitised at 90mm is not usable at 50mm — the density is wrong — and a name that says so prevents somebody sending the wrong one, which is the most common cause of a reorder looking different from the original.

Versions

Keep them, numbered, and never overwrite. The instinct is that old versions are clutter; in practice they answer questions that arise months later, and disk space is free by comparison.

What does not work is the informal version system every shop has produced at least once: final, final_v2, final_NEW, final_USE_THIS. Nobody can tell which is current, including the person who named them.

A version scheme that holds

  • Sequential numbers — v1, v2, v3 — never words
  • One file marked current, clearly, and only one
  • The approved proof identifies which version was approved
  • Old versions kept but out of the way
  • A note on what changed, even one line

The link to the proof is the important part. When a customer says the reorder looks different, being able to see that job 4417 used v2 and this one used v3 turns a dispute into an explanation.

Backups, and getting it back out

Two questions, and most shops can answer neither confidently.

Is it backed up? Artwork is one of the few genuinely irreplaceable things in a decorating shop — equipment can be bought again, artwork cannot be recreated from memory. Whatever your arrangement, test it by restoring a file, not by confirming the backup ran. A backup nobody has restored from is a hypothesis.

Can you get it out? If artwork lives inside a platform, ask for a real export and open it. Files that come back without their names, or as flattened images rather than working originals, are not an export in any useful sense.

Ask that question during the sales process rather than at the end of a contract, when you have the most leverage and they have the most incentive to answer well. It is one of the questions a demo will not answer unless you make it, and it matters more for artwork than for anything else you hold. The rest of the software archive assumes you could find a two-year-old logo this afternoon.

Who is allowed to change it

Artwork that anyone can overwrite will eventually be overwritten by accident. The commonest version is somebody saving a job-specific resize over the master file, so the next reorder starts from a design scaled for a different garment.

Keep the master read-only to most people, and let jobs take copies rather than editing in place. That is a permissions question rather than a filing one, and it is the single change that prevents the most damage.

Prefer archiving to deleting, for everyone but the owner. Most artwork loss in a small shop is accidental rather than malicious, and an archive folder removes the whole category of problem at no cost.

Filed underSoftware
Share
Written byA1printsoft Editorial
175 articles

The print production desk at A1Printsoft. Writes the practical side of running a decorating shop: what things cost, how long they take and what to charge, checked against published trade figures.

Keep reading

More on software

All Software articles

Set up in an afternoon. From what you already do.

Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.