The short answer
- Switching touches prices, stores, artwork sizing and repeats
- Test the new garments properly before committing anything
- Run both accounts in parallel through the transition
- Warn repeat customers whose garments will visibly change
- Keep the old account open — you will want the alternative
Changing your main blanks supplier is a bigger operation than it appears. Every published price, every open store, every stored artwork placement and every repeat customer's expectation is built on the garments you currently buy.
Done carefully it is invisible to customers. Done abruptly it produces a season of small problems that all trace back to one decision.
Reasons to switch
| Reason | Urgency |
|---|---|
| Persistent stock problems | High — it costs deliveries |
| Repeated late or short shipments | High |
| Quality inconsistency | High |
| A style you rely on discontinued | Forced |
| Price uncompetitive | Moderate — negotiate first |
| Poor service or no account contact | Moderate |
| Better data and integration elsewhere | Worth planning for |
Price alone is rarely a good reason on its own. A modest saving with a supplier who ships late costs more than it saves, which is the argument in what good supplier service looks like.
Try negotiating before switching. A supplier presented with specific service failures and a real spend figure will frequently improve terms rather than lose the account.
Changing supplier is not a purchasing decision. It is a product change, and your customers will see it.
What it touches
Everything downstream
- Every published price built on the old cost
- Open stores selling the old garment
- Product data, images and size charts
- Artwork sizing and placement measurements
- Repeat customers expecting the same garment
- Print and cure settings proven on the old fabric
- Any integration feeding your catalogue
Size charts are the most disruptive of these. A new supplier's medium is not necessarily the old supplier's medium, and a store selling from an outdated chart produces exchange requests across the whole order.
Print settings are the second. A different fabric may cure differently, take ink differently, or migrate where the old one did not — all of which needs proving before a customer order depends on it.
Testing first
Before committing
- Order samples of every style you would move
- Compare fabric, construction and actual measurements
- Decorate them with your own process and settings
- Wash test them properly
- Check colour matches against the old garment
- Confirm the full size and colour range is available
- Check landed cost including freight and minimums
Colour matching matters where customers order the same garment repeatedly. A club whose new hoodies are a slightly different navy from last year's will notice when both are worn together, and that is a complaint you cannot answer afterwards.
Test with your own equipment rather than trusting specifications — the method is in judging blank quality, and a supplier switch is exactly the situation it exists for.
Running in parallel
Transition gradually
- Keep both accounts open during the change
- Move one style at a time, starting with a low-risk one
- Fulfil open stores from the old supplier
- Use the new supplier for new quotes only
- Run existing stock down rather than writing it off
- Review after each style before moving the next
One style at a time is what keeps this manageable. Moving everything simultaneously means any problem affects every job at once, and you lose the ability to tell which change caused what.
Never switch mid-store. A store opened on one garment must be fulfilled with that garment, because the images, the size chart and the price all describe it — the exposure discussed in handling changes during an open store.
Repeat customers
Tell them before they notice
- Identify who orders the affected styles regularly
- Explain the change and why — usually availability or quality
- Send a sample of the new garment
- Point out any sizing difference explicitly
- Note any colour difference against previous orders
- Give them the option to keep the old style while stock lasts
Customers accept a garment change explained in advance and resent one discovered on delivery. A short message with a sample turns a potential complaint into a routine update, and most people simply agree.
Uniform and team customers need the most care, because their garments are worn alongside older ones. Where a visible difference is unavoidable, plan the change for a natural break — a new season, a rebrand, a new intake.
The changeover
Update everything
- Cost prices, and every price built on them
- Product data, images and size charts
- Store product listings
- Artwork placement measurements where the garment differs
- Print and cure settings, tested and recorded
- Any catalogue integration
- Your own quoting templates
Doing this properly is the difference between a clean switch and six months of small errors. A quoting template still carrying the old style number will produce a wrong quote eventually, and nobody will know why.
Where product data comes from a maintained catalogue rather than a spreadsheet, most of that update happens by changing the source rather than by editing every record — which is one of the practical arguments for keeping catalogue data connected in the first place.
Keeping the old account
Do not close it. An open account with your former supplier costs nothing and is worth a great deal the first time your new one is out of stock.
Why keep it
- A genuine alternative when stock runs short
- Access to styles the new supplier does not carry
- Leverage in future pricing conversations
- A route back if the switch disappoints
- Continuity for customers still on old styles
Place occasional orders to keep the account active and the relationship warm. A dormant account can lapse, and reactivating it during an emergency is exactly when you have no time.
Two primary suppliers with a tested alternative behind each is the arrangement most decorating shops should aim for. It earns volume concessions, protects against shortages, and means a supplier switch is a considered decision rather than a forced one — the structure set out in managing multiple suppliers. The rest of the suppliers archive assumes a switch was tested before it was announced.


