The short answer
- The machine price is usually the smallest part of bringing a method in-house
- Outsourcing costs margin but no capital, space or learning curve
- There is a volume above which in-house is obviously right — find yours
- Control over turnaround is often worth more than the margin difference
- Outsourcing first is a legitimate way to test demand before buying
A screen shop starts getting embroidery enquiries. A DTG shop is asked for two hundred pieces it cannot run economically. The instinct is to buy the machine, and the instinct is right about half the time.
The real question
It is not "can we afford the machine". It is whether the total cost of owning the capability, at the volume you actually have, beats paying somebody who already owns it.
Shops get this wrong by comparing the wrong things: the outsourced unit price against the in-house consumable cost, ignoring everything in between. The comparison has to include capital, space, labour, training and the months of poor output while you learn.
Buying the machine is the cheap part. Becoming good at it is the expensive part, and it takes longer than anybody plans for.
The full cost of in-house
Count all of it
- The machine, plus everything it needs to actually run
- Ancillary equipment — presses, dryers, compressors, extraction
- Floor space, which has a rent value even if you own it
- Power, and sometimes a supply upgrade
- Training, and the time the trainer is not producing
- Consumables you have never bought before
- Spoilage during the learning period — budget generously
- Maintenance, service contracts and spares
- The labour hour, every hour it runs
Spoilage is the line most often left out and frequently the largest surprise. A new method produces a meaningful quantity of unsellable garments before the operator is reliable, and those garments are paid for at full cost.
Space deserves a real number too. A machine occupying a corner is consuming floor area you could use for staging jobs, and staging space has a measurable value.
What outsourcing costs
| Cost | Notes |
|---|---|
| Margin given away | The obvious one |
| Freight both ways | Often understated |
| Turnaround | Their schedule, not yours |
| Quality control | You still own the outcome |
| Admin per job | Ordering, tracking, chasing |
| Rush capability | Usually reduced or unavailable |
Turnaround is the cost that hurts most in practice. A job you could have run tomorrow becomes a job that returns next week, and that difference decides some orders before price is discussed at all.
Quality remains yours regardless. The customer bought from you, and a fault from a contract decorator is your reprint to organise — which is why choosing the partner carefully matters more than the unit price.
The volume threshold
There is a monthly volume above which in-house wins on cost alone. Work out yours rather than adopting somebody else's rule of thumb.
The calculation
- Total the annual ownership cost from the list above
- Divide by twelve for a monthly fixed figure
- Work out margin gained per unit versus outsourcing
- Divide fixed by margin gained — that is your monthly break-even
- Compare it honestly with what you send out today
Use the volume you have, not the volume you hope the machine will attract. Capacity does create some demand, but "we will sell more once we own it" is the assumption behind most under-used equipment in this trade.
If current volume covers half the break-even, outsourcing is still correct and the answer is to revisit in six months with better numbers.
Beyond the numbers
Three factors regularly override the arithmetic.
Turnaround as a selling point. If rush work is a real part of your business, in-house capability is worth paying for even below break-even, because it wins orders that never reach a quote otherwise — and rush work prices well.
Quality control. Some customers require a consistency that is easier to guarantee when you can see the machine.
Customer expectation. Accounts that want one supplier for everything are worth more than the individual jobs, and a gap in your capability is the opening a competitor uses.
Doing both
The two are not exclusive, and the best answer is frequently a mix that changes per job.
A sensible split
- In-house for your core method at any quantity
- Outsource volumes your equipment handles badly
- Outsource specialist finishes you will never run often
- Keep a contract partner for overflow at peak
- Outsource a new method for six months before buying into it
That last point is the most useful. Outsourcing a method first gives real demand data, real customer feedback and a real sense of the work before any capital is committed — and if the volume never materialises, you have lost nothing.
Deciding
Write the numbers down. A decision of this size made from a general feeling that embroidery would be good to have is the reason so many machines sit idle in so many shops.
Track what you send out so the data exists when you need it. Where outsourced work is recorded against jobs in your production system, the annual figure is a query rather than an afternoon of guessing, and the break-even calculation above becomes a five-minute exercise.
Involve whoever will run the machine in the decision. An owner who buys equipment nobody on the floor wanted has bought a training problem alongside it, and the person who will operate it daily usually has a clearer view of the practical constraints than the supplier's demonstration did.
Ask the contract decorator too. A partner who currently runs the work for you knows your volumes, your typical designs and where they cause difficulty, and most will answer honestly even though the answer may cost them the business.
Then revisit annually. The answer changes as volume grows, as equipment prices fall and as your contract partner's terms move, and a decision that was correct three years ago is not automatically correct now. The rest of the business archive assumes capacity decisions are made against numbers rather than instinct.



